Open-plan offices
Account for desk layouts, visual comfort, work-plane lighting, daylight contribution and variable occupancy. Build zones around actual room use.
Commercial offices and retail spaces commonly use 2 × 2 and 2 × 4 ceiling LED panels. A network-powered approach can combine compatible fixtures with Ethernet infrastructure and a dedicated lighting-control system, but reliable results depend on the exact driver, LED load, switch power budget and commissioning plan.
PoE is a method of distributing power and data—not a substitute for photometric design, electrical planning or full-system compatibility testing. Secure Luma evaluates how fixtures, drivers, switches and lighting controls would work together in the actual facility.
How PoE lighting works →
Different rooms and work zones need different illumination, power allowances and control functions.
Account for desk layouts, visual comfort, work-plane lighting, daylight contribution and variable occupancy. Build zones around actual room use.
Confirm dimming quality, local control, scene requirements and what happens if centralized lighting software or the network is temporarily unavailable.
Assess color rendering, merchandise appearance, fixture placement, daylight and where separate accent or conventional lighting remains appropriate.
Review occupancy response, necessary continuous lighting, emergency-lighting arrangements and access for servicing drivers and cabling.
A nominal 35 W LED panel needs more than 35 W at the input after driver efficiency and control circuitry are considered. Two nominal 35 W panels total 70 W of LED output before conversion losses, leaving little margin against the worst-case Type 4 powered-device power allowance. Do not presume a paired-driver kit is compatible at full load without documented testing.
The design must account for per-port PoE rating, total switch power availability, headroom, cable loss and the actual lighting-driver load. A 60 W 2 × 4 panel can also approach the limits of some driver and powered-device combinations. Preliminary watt calculations are useful for feasibility, but they are not proof of electrical or software compatibility.
UniFi network management is not necessarily a lighting scene or dimming controller. For tunable white, schedules, occupancy sensors and wall controls, specify a compatible lighting-control platform and verify local operation, network segmentation and the expected behavior after restarts or outages.
Share the ceiling plan, grid dimensions, target light levels, room types, operating hours, desired control features and available rack space. Fixture catalogs, existing panel wattage and preferred color temperature help narrow down what deserves a detailed technical evaluation.
For preliminary power sizing, use our UniFi lighting planner. Compare real hardware references in the equipment catalog and read our equipment qualification process.
External references: UniFi published PoE switch specifications and U.S. Department of Energy guidance for commercial LED lighting.
Share your layout, fixture information, desired controls and operating schedule for a project-specific discussion.